In 2018, the new roller skates with roller skates and roller skates.

SKU

体积

尺寸

装箱数

重量

价格￥

72.00

($) US dollar price changes with exchange rate

立即购买

Detail

The new wings are all skates. Material: the new material aluminum alloy bracket pu wear-resistant wheel 4 wheel luminous. Packing number: 6 pairs/boxes.

Color: blue powder

Size: adjustable,S (31-34) code,M (35-38) code,L (39-42) code.

Volume :S 0.05 cubic M 0.058 cubic L0.069 cubic (size code size is different)

Gross weight:S 12 KGS M13kgs L14kgs

Contact: hu huihong.

Contact number: 13064693999.

[safety description]

Children under 5 years of age or younger should glide under adult supervision. 2. Wear adequate protective equipment (e.g. brace, elbow, knee, helmet) when taxiing. 3. Check whether the screws, rivets and shoes on the product are firm before taxiing. 4. It should be taxied in a safe and legal field. 5. Avoid parking lots and lots of people on the ground or at night. 6. Avoid sliding on the water, oil or uneven ground.

Roller skates maintenance 1. Wash shoes regularly to prevent stink and avoid breeding bacteria. 2. Replace the wheel on the left and right sides frequently, which can make the wheels of roller skating shoes more durable. 3. Avoid sliding on rough pavement, which can prolong the service life of wheels and bearings. 4. Do not replace the wheel or bearing individually, which will reduce the stability of sliding. 5, if the bearing is used long, when slide is not smooth or there are \"rustling\" sound, the bearing can be removed and placed on the \"go to soiled oil\" for half an hour, the impurity within the bearing cleaning, spray on oil or bearing special oil. This can extend the service life of the bearing. 6. When the product is not in use, it should be kept in dry and without direct sunlight. This has certain effect on preventing the rust of accessories and product aging.

Personal summary: the individual thinks that in the roller skating exercise (training) the following requirements can fully realize the maximum potential of the equipment.1. Avoid roller skating activities in places where sewage, corrosion and easy to cause equipment damage;1. Remove dust from pulley and bearing with air blow or brush after the roller skating activity, and wipe the vamp with a soft towel;2. Check the running condition of the bearing daily, whether there is rotational blocking and running noise;3. Maintain the bearing regularly according to the frequency used.

Simple detection and maintenance of roller bearing1. When the bearing runs to a certain period (or maintenance period), all bearings are removed;2. Soak and clean the bearings with clean diesel oil or kerosene oil. If there is technical condition, it is better to open the sealing cover to clean.3. Dry cleaning oil after cleaning and appearance inspection for damage;4. With a diameter of about 150mm, the diameter is equal to the inner diameter of the bearing (preferably hollow tube), and a bearing is fixed at one end;5. While rotating the bearing rapidly with the hand, the other end of the stick (wood tube) will be heard on the ear or audio amplifier.Bearing turns noise;6. After the fixed bearing, the wooden rod is pushed horizontally to check whether the bearing is worn and loose;7. If it is loose and serious, the bearing with excessive noise and serious defect shall be eliminated and replaced by the same model;8. Take a metal drum to melt the proper amount of grease (high quality yellow dry oil) with a gentle heat (not overheat), and put the tested bearings in place.Soak in the bucket until no bubbles overflow. Remove the bearing before the grease is cooled, and the residual grease is small. Remove the shaft after the grease cools.Bearing, residual grease is much. Determine the amount of residual grease as needed.9. Use soft cloth or toilet paper to clean the grease on the outside of the bearing to install the bearing on the pulley, and the maintenance work will be finished.10. You can learn from each other according to your own equipment.

[roller skid technique] 1. Stand firmly and directly: stand the two feet in a t-shape or take the heels together and make the v-shape. 2. Start: start from the t-shaped position, keep the front foot forward, and push the back foot forward. 3. Taxi: in order to maintain a good balance, let one foot lift slightly ahead of the other foot and bend the knee. 4. Swing of the body: put the center of gravity on the left foot, push it with the right foot and stretch out on the outside, and slide; Then parallel your feet. Next, focus on the right foot and push the left foot out, stretching and sliding. 5. Body posture: the body is slightly squatted, as if to sit. Stretch your feet forward, bend your knees and ankles, and relax your weight on the whole pair of shoes. Slide 6, stop: in the above position, both feet close to remain parallel, with the foot brake a little slide forward, make the two feet distance roughly half a foot, filed a tiptoe until brake touch the ground, then slowly moving weight to brake, increase the pressure, until the stop.

How to brake?

The straight row wheel is one foot brake, our habitual right foot brake.

Is your feet parallel, with the brake device of the foot, toes slightly upward, let is ground to the ground, will is the more hard pressed to the ground, can quickly stopped, bad people can also does. Remember to keep the center of gravity low, and keep it between your feet, not too much or too late!

Our factory has been producing scooters for a full decade since 1999, and the products sell well both at home and abroad and export to many countries and regions. Our factory is located in the beautiful scenery of the \"China hardware capital of yongkang furusan town, is a company specializing in the production of foot scooter, plastic baby carrier, slippery nimbus, vigor board, vitality, helmet, sports leisure products such as gear manufacturers. Always uphold the principle of \"integrity, customer first\". Welcome friends from all walks of life to guide, visit and business negotiations.